Re: Monitor packet drops across all ESXi hosts
That works well - may thanks. I've changed the addminutes to 60, and have a loop cycling through the ESX hosts. Could the script be changed to ignore a line if the dropped packets was 0 ?
View ArticleRe: possible disk perf - how to diagnose?
Look at the performance charts for each VM's virtual disk. Specific the 'device command latency' value. Anything over 10-15 is a problem.
View ArticleRe: using an input file
Mark Jones wrote: Driver, You can also use a CSV spreadsheet with headers and colums if you need more data. IEhosts.csvhostname,ipblah.blah.com,10.10.10.10 Then you can do$data = import-csv hosts.csv...
View ArticleRe: ovftool importing syntax
I guess there was something with the install. I reinstalled it and works now. thanks
View ArticleClik here to view.
ISCSI Multipathing (Active/Last Active)???HUH
Spent three hours on the phone with VMware and wasnt given any insight into why both paths done show active: The backend array is an EMC VNXE 3150, Array ports:Example of one of the LUNS:Running...
View ArticleRun As Service
I was wondering if anyone has run into this problem. After ThinApp'ing the Cisco Historical Reporting Client application on a vanilla Windows XP virtual machine, I can't get it start on any other...
View ArticleDatacenter bridging protocol, how to use it?
So I've been doing a good bit of reading on Datacenter Bridging protocol, it seems that it's a natural extention of the Ethernet protocol. I'm not much of a network guy but I'm trying to drive maximum...
View ArticleRe: Pb connexion avec VI client vers ESXi 3.5
J'ai pas trop bidouillé ces paramètre jusqu'a present.En regardant un peu la doc sur de la VI5 :...
View ArticleRe: Candidate to be tested under Virtualizing Business Critical Enterprise...
You'll never see this, because Microsoft won't allow anyone to publish benchmarks of their apps running on VMware.
View ArticleRe: HOL-INF-01 : Directions for what to do in LAB?
The Lab Manual is integrated into the UI.. (we put the portal in maintenance mode at the moment) once we are back on look at the right hand side of the browser,,, thanks
View ArticleRe: ovftool importing syntax
ok now I am getting this error The manifest validatesOpening VI target: vi://root@10.180.0.7:443/<http://root@10.180.0.7:443/>Error: Failed to communicate with VI serverCompleted with errors
View ArticleRe: Installing srm 5 in shared mode in site that acts as recovery and protected
As long as each SRM server has its own vCenter, you can do whatever you want. Otherwise the answer is no.
View ArticleClik here to view.
Re: possible disk perf - how to diagnose?
I do not see that value in chart options. The closest is "highest disk latency" which shows all 0 - so I doubt it's working?
View ArticleRe: possible disk perf - how to diagnose?
so OK I was looking at "disk" not "virtual disk" - not sure what the difference would be from a guest perspective? Anyway ... virtual disk does have "read and write latency" values. None of the values...
View ArticleRe: management network, set on host or vcenter?
What I'm wondering is-What is the IP address on the host for. Obviously you can download vmware client and also use this address to add it into vcenter. Does it have any other purpose? -I think it may...
View ArticleRe: Upgrade ESXi 5.0U2 to 5.1 - Supermicro X7SBi
Update. The same shit happens for the fresh installation of ESXi 5.1.Two identical hosts with X7SBi MB has been tested.
View ArticleRe: Moving to ESXi 5.1...non-intuitive...(NIC Teaming question too)...
I guess another appropriate question would be: Does it make sense to even bother with vDS, or should I just go with vSS? I should have problably mentioned that we will eventually be linking the 5.1...
View ArticleRe: ESX 3.5.0 - Linux Guests go ReadOnly
I'm running 5.1 and still see this issue with older Linux guests. The only fix is to upgrade the Linux guest.
View Articleace.dat file missing
I just updated to vmware player 5.0.1. It uninstalled my old vmware player and rebooted. When it came back up, the setup file timed out.I downloaded the install file and ran it. Everything installed...
View ArticleRe: Cannot Install Update Manager 5.1
My issue was when the update process is asking for vsphere credentials the default prior to v5.1 must have been for the system to add the domain to the user you enter with v5.1 it no longer adds the...
View Article