Re: How to protect VDP
Just make sure that the storage repositry is protectcted. The VMDKs or LUNs where the backups reside. Anytime, even if your VDP fails, you can create a new one and point it there.
View ArticleClik here to view.
Re: Converted W2K Server installs drivers on logon
Since I wasn't sure what it was doing, I cancelled them and didn't install them. The P2V process injects the drivers for the Mass Storage Controller and the Keyboard and Mouse along with the required...
View ArticleRe: P2V Question
At the last stage of conversion (use converter 5.0) you will get an option to select/de-select the volumes which you don't want to convert. Don't select the 4.5 TB, just un-check it and complete the...
View ArticleRe: invalid host after registering vmx file
Use storage vMotion between datastores, this will fix the folders naming.
View Articledatastore not accessible vsphere 4.0
datastore not accessible on vsphere 4.0...we have a server with fiberchannel connection on hitachi datastore ams2100 and have 2 lun connected, 4 days ago i try restart my host. and suddenly one of my...
View ArticleEsxi5.0 to 5.1 Live Vmotion
Hi Guys, I have two Esxi host, one running 5.1 the other running 5.0 both R710 but the CPU models are different. and Unfortunately the one that is running 5.0 the CPU does not support AES-NI feature...
View ArticleRe: datastore not accessible vsphere 4.0
Hi, Please post the kernel logs once a rescan is initiated also do let me know the NAA id of the lun.
View ArticleRe: Esxi5.0 to 5.1 Live Vmotion
Create a cluster if you didnt do already. Add both ESXi servers to it and enable EVC....
View ArticleRe: invalid host after registering vmx file
Hi, Few scenarios were in vm will show in inactive state is After a vMotion or VMware DRS migrationAfter a VMware HA host failure occurs, or after the ESX host comes out of maintenance modeA...
View ArticleRe: how to remove a vm from inventory in vcentre when the host is down
You need to disconnect the host from the cluster so the VMs will disappear. Then you can add VMs to the inventory from the Datastore.
View ArticleRe: datastore not accessible vsphere 4.0
Also let us know if there are any changes in zoning or on the storage level.
View ArticleRe: how to remove a vm from inventory in vcentre when the host is down
Hi Mouhamah, yes tried that. i was able to disconnect the host, but that didnt change the vm state - they were still "disconnected". i was sure the host was disconnected, because i coudl then go...
View ArticleRe: What does a snapshot of independent disks take?
Configuration file of a VM. For example, if you have 4 NICs on that VM before the snapshot and are removed later. When reverting back the snapshot, it will put back the initial configuration. This...
View ArticleVMware Partner Portal
Hi all I think this is not the right portal to post this question, sorry for this but what to do i didn't get the right portal so...Actually i have an account in VMware partner portal.. I am certified...
View ArticleRe: how can we know if esx with static ip is listen to DHCP server on nics?
thanks for the reply André >Do you see any entries in the guest's event logs regarding this issue? What type of physical switch do you use? In case of a managed switch how did you configure the...
View ArticleRe: delay of 2 minutes when connecting to view desktop thru PCoIP
Hi,I am using only self signed certificate. It is being tested in the Intranet environment.Can the delay be due to this?Thanks in advance
View ArticleRe: Esxi5.0 to 5.1 Live Vmotion
Thanks for the quick reply, I have a slight problem, 1 x R710 with nehalm CPU E5530 1 x R710 with westmere CPU E5620 How would u enable EVC for both u can only do one or the other feature set. SO I am...
View ArticleRe: Info on Hyperthreading
Hi Andre, I have attached snaps of the HT status which is displayed on vSphere client.
View ArticleRe: Info on Hyperthreading
BIOS settings has been verified on hardware side. All options regarding HT are set and verified by Dell.
View Article